Key feature:

* Built to the highest international standards, UKCA,CE, EN15194

* 36V/500W super power brushless gearless hub motor

* Restricted to 250W and 16 mph by default as a road-legal kit

* Nylon tire& alloy rim& stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Thumb throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* 8 point Crank speed sensor for High Efficient pedal assist

* Aluminum alloy powerful controller

Note:

1.The system requires a 36 Volt electrokinetic cell battery with a nominal capacity not less than 8.8Ah.

2.Battery and charger is not included in Package

3.To install the Bicycle Kit, Please follow the Instruction that come along

4.Maintain full power of 500W while using PAS

Caution: For your Safety, Please turn off the battery before connecting the Controller!

Specifications:

Wheel type: Front Wheel Motor: Brushless Gearless

Tire: Nylon Rim Material: Alloy double wall

Power: 500W / 36V or 250W / 36V Spokes: Steel, 12G×2.6mm, 36pcs

Wheel Size: 26" Rim Diameter: 22.56"

Front Dropout: 100mm Rear Axel: 170 x Φ10 mm

Suitable Disc: 160mm Max speed: 22 mph or 16mph

Max load capacity: 100kg Torque: 35 N.M

Controller: Sine Wave Three-Mode Controller

Package Include:

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Thumb Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

1x Tyre (Not Installed)

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Questions:

1 Answer

VOILAMART 36V 500W-250W Bike conversion kit. Would you please confirm that when the PAS is connected to wire No.9 on the controller and the Thumb throttle is connected to wire No2 on the controller, the default top speed for both the PAS and Thumb throttle will be 16mph and not 22mph? If this is not the case, what do I need to do to make it so? If this is the case, how do I change the connections to make both the PAS and Thumb throttle have the same default top speed of 22mph? There are 2 wires No.4 on the controller referred to as the ‘Lower Speed Wire’, but I am unable to find anywhere that explains their different functions and where to connect them in order to achieve this.

Posted by Ray Coles, Thursday, 26 December 2024 on product Voilamart 36V 500W 26" Front Wheel Electric Bicycle E Bike Conversion Motor Kit with Thumb Throttle

Question:

VOILAMART 36V 500W-250W Bike conversion kit. Would you please confirm that when the PAS is connected to wire No.9 on the controller and the Thumb throttle is connected to wire No2 on the controller, the default top speed for both the PAS and Thumb throttle will be 16mph and not 22mph? If this is not the case, what do I need to do to make it so? If this is the case, how do I change the connections to make both the PAS and Thumb throttle have the same default top speed of 22mph? There are 2 wires No.4 on the controller referred to as the ‘Lower Speed Wire’, but I am unable to find anywhere that explains their different functions and where to connect them in order to achieve this.