Voilamart 28" 48V 1000W Front Wheel Electric Bicycle Motor Conversion Kit Bike Cycling Hub

This 28" 1000W Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You’ll be out cruising along at 28 mph (45km/h) without a sweat!

Key feature:

* Built to the highest international standards, CE, EN15194, UKCA

* 48V 1000W and 250W super power brushless gearless hub motor

* Restricted to 250W and 15 mph by default as a road-legal kit

* Nylon tire& alloy rim& galvanized steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist

* Aluminum alloy powerful controller

Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1000W power or 250W power by a single blue switch wire is embedded in controller.(Only for Twist Throttle)

* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")

SPECIFICATIONS:

Wheel type: Front Wheel

Motor: Brushless Gearless

Tire: Nylon

Rim: Double Wall Alloy

Power: 1000W / 48V or 250W / 48V

Torque: 45 N.M

Spokes: Steel, 12G×2.6mm

Wheel Size: 28" (72mm)

Rim Diameter: 24.92" (633mm)

Front Dropout: 3.9" (100mm)

Wheel Axle: 6.89" (175 x Φ10mm)

Compatiable Disc: 160mm

Max load capacity: 440 LBS

Max speed: 28 mph or 24 mph

Net weight: ca.11.5kg

Package Include:

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

Note:

1.The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.

2.Battery and charger are not included in package.

3.The UK regulations dictate that a kit must not exceed the rated power of 250W to be road-legal!

So please connecting the Road-legal Switch Wire and disconnect the PAS on Road.

Caution: For your Safety, Please turn off the battery before connecting the Controller!